• Product Name:

    HY901 Pad printing silicone rubber

  • Product No:


  • Brand:


  • Product Usage:

  • Commodity price:

  1. Product's Detailed
  2. Detailed parameters

The product with the advantages of high temperature resistance, abrasion resistance,  good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining. The product can be used to make high-quality silicone tampo print pad, which is mainly applicable to plastic toys, electroplating products, electronic toys, trademarks and irregular pattern printing. The silicone rubber pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface.

1)High temperature resistance
2)Good printing effect
3)Good resilience with high print times
4)Excellent abrasion resistance
5)Permanent and durable

Standard Datasheet:

Model Appearance Viscosity (cps) Hardness (A°) Tensile strength (Mpa) Tear strength (KN/m) Elongation (%) Mixing ratio(%) Pot life(H) Demould time(H)
901 red / yellow
/ green / white
32000+3000/-5000 30±2 3.8+1/-0.3 22+5/-2 ≥350 2~3 0.5 2~4

Operation Instruction for Print silicone rubber
1.Fully clean the prepared mold and dry the mold with an air gun(also you can dry it by wiping it with a clean cloth).
2.Spray some release agent on the surface of the mold.                    
3.The ratio of silicone an silicone oil depends on actual demands. If you need soft printing pad, then you could add more silicone oil; Otherwise you can add no or less. Normally, The hardness range  from 15 A° to 25 A° is appropriate.   
4. Do not add too much silicone oil, it will ruin the silicone pad.  

Inquiry description:
Company Name: