keyword:
  • Product Name:

    HY-215

  • Product No:

    HY-215

  • Brand:

    HY Silicone rubber

  • Product Usage:

  • Commodity price:

  1. Product's Detailed
  2. Detailed parameters

Description:
HY215  potting compound is a kind of condensation cure silicone in two parts with the characteristics of strong adhesion, excellent thermal conductivity, good moisture protection, high temperature resistance. It can be cured completely at room temperature. The safety of this RTV encapsulation material can reach the EU-ROHS requirements fully.


Usage of the encapsulant silicone:
- Applying for the surface of PC (Poly-carbonate), PP, ABS, PV, photovoltaic cell, PVC, metal, etc.
-Encapsulation for protection of general electronic module, electronic components
 -Insulation, waterproof and bonding of electronic parts
-Bonding, Sealing (as a sealant or adhesive) for LED, LCD electronic display, circuit board, automobile component
-Outdoor protection for LED screen

Technical Parameter:

Properties index Part A Part B
Before curing Appearance Black fluid Yellowish fluid
Viscosity(cps) 2500±800
Features when operation Mixing Ratio(By weight) 10:1
Operating Time(25℃ /min) 60~120
Curing time(hrs,basically cured) 3
Curing time(hrs,perfectly cured) 24
Hardness (shore A) 15±3
 
After Curing
Cementability Very good
Thermal Conductivity[W(m·K)] ≥0.4
Dielectric Strength(kV/mm) ≥25
Dielectric permittivity(1.2MHz) 3.0~3.3
Volume resistivity(Ω·cm) ≥1.0×1016
Fire Resistance UL94-V1

Notice:
1. All the data is  based on the condition of 25℃ with 55% humidity.
2. Sealing package for storage. The mixture should be used up at once to avoid wasting.
3. Dot not let the liquid go into mouth and eyes when operate the potting process.
4. When it gets stratified after a period of storage, you should mix the electronic silicone rubber evenly before using, it does not affect the performance(before the expiration date).
5. It can be stored for 12 months at 24℃ in original unopened packages.

Technical guidelines for silicone rubber potting:
1. Please put part A and B in separate container and stirs evenly before mixing the two parts together
2. Weight Ratio: part A: part B = 10:1
3.Bubble release if necessary, Deaeration the mixture under 0.08 MPa for 3 minutes.
4. HY 215 is cured at room temperature, so please put it under room temperature after pouring. It comes to next process when basically cured, and it takes about 24 hours for completely cured (Temperature and humidity will influence the curing of HY215.)


Previous:No

Inquiry description:
Name:
Email:
Phone:
Company Name:
Address: