keyword:
Your present location:Home > Products > Addition silicone > Molding silicone rubber >
  • Product Name:

    Liquid Silicone Rubber For Mermaid Fish Tail Mold Making

  • Product No:

    HY-E625

  • Brand:

    Hong Ye silicone rubber

  • Product Usage:

    Silicone Rubber For Mermaid Mold Making

  • Commodity price:

    US $10-19 / Kilograms |

  1. Product's Detailed
  2. Detailed parameters

Liquid Silicone Rubber For Mermaid Fish Tail  Making

Descriptions 

HY-E625 belong to platinum cure liquid silicone is generally named two-components silicone

rubber, Part A and part B. It features an exceptional fluidity and good operability.

 Applications

Platinum cure liquid silicone could be mainly used for makingMermaid Fish Tail,concrete Stones mold , jewelry mold , statue mold, artificial craft mold, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other FDA food product mold making,prototyping etc.

 

 Advantage

* low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1)

*good fluidity easy for pouring operation ( in round 10000 cps )


Technique Data Sheet of E-625 platinum cure liquid silicone

Product

E-625

Appearance

Translucent

Hardness(shore A)

25±2

Mix ratio(A:B)

1:1

Viscocity(mPa.s)

 12000±2000

Tensile strength (kgf/cm2)

50±5

Tear-strength (kN/m)

18±2

Elongation(%)

450±50

Pot life/working time (mins)

30-40

Curing time/setting time (hrs)

3-4hrs(25°C)

110-20mins(60°C)

Shrinkage rate (%)

≤0.1

(Note: the hardness , color, curing time and operation time is adjustable)

 

Operation instruction of HY-E Series molding silicone:

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

 

Notice: As our E-series silicone is platinum cure silicone , which is very easy to cause

cure inhibition , so pls do remember thoroughly clean the model and tool before

operation . Besides , pls avoid the liquid E-series silicone contact or mix with the

following material , otherwise the silicone won't be cured :

1. Liquid condensation silicone ( condensation silicone not completely cured or organic

tin compounds )

2 .Sulphur, sulfide and sulfur rubber materials.

3. Amine compounds as well as contains the amine materials.

4 .Pewter solder flux.

 

Package
20kg/drum, 25kg/drum, 200kg/drum.
.jpg
 
 
-.jpg
-.jpg
-.jpg
HTB1.png
--.jpg
 
 
 
Contact: Laura Luo
QQ: 2355542539
Email: hyco@szrl.net
Mob/Whatsapp:+86 189 3886 7556 
Fax: +86-755-89212365
Tel: +86-755-89948019 


For Wechat Service:

 
 

Next:no

Inquiry description:
Name:
Email:
Phone:
Company Name:
Address: